Hi:


I ordered and received a good used (NON-bio-degradable) engine harness for my 1995 E320. Its part number is 124 440 5632.


However, when I got the battery out and started to disconnect the old harness, I see that the tag on it has part number 124 440 2933.


Do any of you know if these two harnesses are interchangeable by any chance, or do I have to send this one back and get the 2933 part? I'd sure like to be able to make the replacement one I have now work on this car, so if there's any mods I can make to it that would be great.



I'd appreciate any advice you more experienced E320 owners can offer!


Eric

see the attachment-they are not the same, no reason given. good luck, chuck.

Attached Files

J2PrinterWorks print document.pdf (78.8 KB, 213 views)

Thanks for the info--I appreciate it!


Eric

I ran into the same exact problem with PeachParts when I replaced my engine wiring harness. They made good on the part, though the one you need is more expensive.

__________________
95 E320 Cabriolet, 169K

Found an excellent used harness on eBay for $700, and consider myself lucky since I know these are more rare and expensive than the earlier ones.

The harness part# was changed mid-year on >95 124.032 chassis.

You can tell the difference b/c the later harness has a square plug for the sensor on the thermostat housing.
The earlier ones have a round connector.

There are other differnces, but that is the easy visual between early/late...

Early being the 5632.

Not interchangeable...........

__________________
A Dalton