I just changed the transmission fluid on a 2000 m320 and after driving 10 to 15 miles to get to temp the level is just covering the top line on the mb dipstick. should I drain a few ounces out or do you thing this will be ok?

Given the propensity for the 722.6 to leak, I'd lower the level about 10mm.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff

Drive at least 30 miles then drain to no higher than top line.

__________________
Jim

Thanks