trying to find out if the SBC needs to be turned off with STAR software prior to changing pads/rotors or can the SBC unit be unplugged to the same end?

thanks in advance


g

__________________
0o==o0

James 4:8

"...let us put aside the blindness of mind of those who can conceive of nothing higher than what is known through the senses"
-Saint Gregory Palamas, ---Discourse on the Holy Transfiguration of Our Lord God and Savior Jesus Christ


Centrally located in North East Central Pa.

You can unplug the SBC unit and be fine.

__________________
Jim

thanks, Jim

__________________
0o==o0

James 4:8

"...let us put aside the blindness of mind of those who can conceive of nothing higher than what is known through the senses"
-Saint Gregory Palamas, ---Discourse on the Holy Transfiguration of Our Lord God and Savior Jesus Christ


Centrally located in North East Central Pa.

just did the brakes on my SBC car, 2004 e320, and I used the foxwell to turn off the system and also found I did not need the tool to compress the brake cylinder. I just stacked stuff on the caliper and wedged a lever into position and forced it back. I think a woodworking clamp would work fine. These brakes are EZ to do..most difficult operation is removing the metal clips and replacing them, so I just left the clips in place and changed the pads only..and sensors. Not much more diffcult than changing a tire. (and the fresh pads added a nice increase to braking grip-I chose ceramic high end pads)

hardest part for me was getting (or not getting) the T-30 Torx out of the rotor without a drill......i was 1 for 4 which is a .250 average which won't get me into the HOF

__________________
0o==o0

James 4:8

"...let us put aside the blindness of mind of those who can conceive of nothing higher than what is known through the senses"
-Saint Gregory Palamas, ---Discourse on the Holy Transfiguration of Our Lord God and Savior Jesus Christ


Centrally located in North East Central Pa.

yes. Nice isn't it?

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.