"Reset mixture"---set the mixture to a "basic starting point" According to the .pdf, this basic starting point is when the fuel is just shy of rising in the fuel injector ports... " If no fuel is rising...rotate the 3mm allen key clockwise until fuel just starts rising. When the fuel starts rising, back the allen key off...about 15 degrees. This should give a basic starting point..."

Yes, the 2 vacuum ports under the throttle body were 2 of the three I found and plugged.

Big rubber boot appears to be tight...I can't tighten the screw on the clamp any further and the ends are not touching.

Plan is to keep and drive.

__________________
1982 300SD " Wotan" ..On the road as of Jan 8, 2007 with Historic Tags