|
|
|
|
|
#1
03-20-2020, 08:14 PM
|
|||
|
|||
|
W211 shifter interchange?
Hello! I have a 2005 E500 4matic wagon that needs new/used shifter (ESM/electronic selector lever module). Its intermittent and scan indicates its defective. Installed unit is 211 267 29 24 (confirmed by my EPC) . I've had it apart, checked for typical Benz solder joint issues or water/coffee/soda damage, found nothing. As my ECP is a bit dated, is there a newer part number that supersedes what I have? Haven't located anyone who reconditions (BBA said no) other than in the UK so its going to be a used unit. Hundreds on ebay but only one with the existing part number priced over double of the rest. Please help if you can. Thanks!
__________________
Hanno '79 6.9 Sold (after 27 years) '83 280SL, 5 spd. '94 E320 Sdn. 5 spd conversion '02 E320 Sdn.(on loan to mom!) '87 300E (5 spd. conversion) Sold '05 E500 Wagon 
|
|
#2
03-21-2020, 01:38 PM
|
|||
|
|||
|
A 2112676324 from ebay is on its way to me. If the first numbers on the line below the part number are date code, then it was manufactured in 2018 (pictures of other units show 03 thru 09). I'll update when installed.
__________________
Hanno '79 6.9 Sold (after 27 years) '83 280SL, 5 spd. '94 E320 Sdn. 5 spd conversion '02 E320 Sdn.(on loan to mom!) '87 300E (5 spd. conversion) Sold '05 E500 Wagon
|
|
#3
03-25-2020, 04:30 PM
|
|||
|
|||
|
New shifter received, installed, no codes, set to go. Well maybe.... The new part operating lever that connects to the shift rod is straight, allowed rod to rub on the flex disc. Removed, transfered electronics to my old unit, reinstalled old unit with offset lever (about an inch). All is well.
__________________
Hanno '79 6.9 Sold (after 27 years) '83 280SL, 5 spd. '94 E320 Sdn. 5 spd conversion '02 E320 Sdn.(on loan to mom!) '87 300E (5 spd. conversion) Sold '05 E500 Wagon
|
|
#4
04-20-2021, 03:47 PM
|
|||
|
|||
|
Thanks for posting this narrative!! I have a 06 E350 with a possible bad shifter. All I read talked about programming that would be needed from the dealer if I bought used. Have been absorbed with other projects and have not addressed the problem - my sincere thanks for the excellent info. It looks like there's a strong possibility I could do exactly as you did. Thanks again...
|
 |
| Bookmarks |
|
|
Linear Mode
