|
|
|
#1
|
||||
|
||||
question on 95 E320 intake switch over valve vacuum source
I pulled the intake manifold off of this one not too long ago and now during reassembly I am unable to find the vacuum line that used to connect to to the switchover valve underneath the intake. If anyone could provide info regarding where this is supposed to be sourced from I'd appreciate it.
tia
__________________
Jim |
#2
|
|||
|
|||
It gets vacuum from the intake, being mounted into it. There should be a short piece of vacuum line connecting the two halves of the switchover valve assembly, IIRC
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|