|
|
|
|
|
|
|
#1
06-04-1999, 10:38 PM
|
|||
|
|||
|
Can you provide the normal amp reading of
good pump, Below/Above what reading should I be immediately concerned? |
|
#2
06-05-1999, 10:54 AM
|
|||
|
|||
|
Your fuel pump current drew is approx 7.5 Amp
should not exceed 10 Amps,If over replace it. The fuel delivery should get 1 liter after 40 sesconds or more. Hope that help ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
|
#3
06-06-1999, 12:44 PM
|
|||
|
|||
|
The pump isn't the thing that can cause the curent draw to exceed 10A, a plugged filter or screen at the fuel distributor can raise the amount of current the pump requires. Fuel delivery is measured on the fuel RETURN line & most M.B. pumps are rated at 1 liter(quart) in approx 30 sec. Hope this helps!
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 190E Fuel Pump Relay/Electrial problem | treynolds | Tech Help | 0 | 05-29-2003 10:59 AM |
| 380E won't start, fuel problem (pump good) | New2MBZ | Tech Help | 0 | 05-22-2003 12:06 AM |
| Fuel pump 1971 280SE | rggball | Tech Help | 0 | 05-08-2003 10:46 PM |
| Fuel Pump Has Quit | kmejr09 | Tech Help | 0 | 04-26-2002 10:17 AM |
| C280 Fuel Pump | David C Klasse | Tech Help | 0 | 10-06-2001 05:36 AM |
Hybrid Mode
