Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-31-2002, 10:09 AM
Registered User
 
Join Date: May 2000
Posts: 317
Question Injector O rings

I have a question. I have replaced the fuel injector holders and the seals, I also ordered the O-rings but for the life of me I can not tell where they are installed at. When I changed the holders and the seals from the original injectors (that's all that was there ) there were no O-rings to be replaced. My question is, even though there are seals do the O-rings still get installed or does the seals act as both. Could the lack of an O-ring be part of my problem for roughness at idle?

I also installed new injectors..

__________________
Richie
1986 300E

Last edited by rich30769; 08-01-2002 at 03:18 PM.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page