|
|
|
#1
|
|||
|
|||
Drive Belt, O2 Sensor
Hey Folks,
Anyone have a tip for replacing the Drive Belt on an '88 300E? I also just changed my O2 Sensor and the Check Engine Light still won't reset. Help... |
#2
|
||||
|
||||
make sure when relieving tension on the belt That you loosen the lock nut before you loosen the adjuster bolt or you will strip the tensioner! good luck
__________________
Brandon 2008 S550 1957 Dodge D100 1967 VW Microbus 21 Window 2001 Suburban 2004 Beach cruiser bicycle -----------------GO DUKE!----------------- "It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776 |
#3
|
||||
|
||||
Many things other than a bad O2 sensor will trip the check engine light. Search the archives for how to read the code behind the check engine light.
Check the archives as well for step-by-step instructions on replacing the serpentine belt and what to check while you have it out. If your belt was loose, the tensioner is probably worn beyond serviceability. Sixto 91 300SE 87 300SDL |
Bookmarks |
|
|