|
|
|
#1
|
|||
|
|||
300se blower regulator
I just purchased this porcupine part and have no idea where it is located on the vehicle - anyone have any idea? I could not find it in the CD.
Thanks |
#2
|
|||
|
|||
Hi,
On my 1987 260E it is underneath the blower motor which is under the wiper arm. Quite a bit of work to reach it. I found the description on the CD. Dont know if this will help. Saumil
__________________
Saumil S. Patel |
#3
|
|||
|
|||
ON the 1988 thru 1991 W126 chassis it is mounted inside of the blower motor case which is inside of the car on the passengers side. You first must remove the under-dash panel on that side.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#4
|
|||
|
|||
Thanks guys - appreciate your time.
|
#5
|
|||
|
|||
To add to Doc's reply, it is very easy to get to; unlike the 124 body regulator.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#6
|
|||
|
|||
Thanks alot. I just finished replacing it and you were right but those trim panels can be a real pain in the arse.
|
Bookmarks |
|
|