|
|
|
#1
|
|||
|
|||
124 rear subframe bushings
What is the dealer shop time to do rear subframe bushings on my '87 300D 124 car?
Here is my situation - car (especially in winds - e.g. driving across south dakota) feels like front and rear don't agree on which way to go. when its not so windy and road is very smooth, all is well. - shocks replaced 71Kmi ago Bilstein comfort - but right rear leaks. - two independents believe the subframe mounts are Okay, HOWEVER - when I see cars on lift, the rear subframe mounts that are much newer look different than mine. mine appear to stretch and I see cracks in the rubber - when the car is jacked up on diff (my garage) with nothing else supporting rear, the rear mounts seem to pull away and I can see shaft/bolt. I hope I'm describing with correct words. But it just doesn't seem right to me. What do you all think, and what's the shop time to r/r subframe bushings? Thanks, Brian |
#2
|
|||
|
|||
Check the links first, they are easier to replace if worn.
Toe-in link is the primary suspect.
__________________
/Per MB E300TDT -98 |
Bookmarks |
|
|