I have the door panel off. I removed the three 10 mm bolts that appear to be securing the motor to the door. I saw a hexhead bolt that appeared to be part of the adjustment on the motor. Can anyone tell me whether the window needs to be up or down to replace the electric motor and what fasteners need to be removed?--so I can get this motor out.
Thank you very much,
Steve

P.S. Is there a location on the web that might have a diagram of the door?

Here's a photo Hex bolts in lower left.

Attached Thumbnails

 

I got the motor out it was just stuck in place . I tested the black and green wires for juice and when touched with the positive lead both read 12 volts. Any Ideas?