|
|
|
|
|
#1
01-01-2003, 11:17 PM
|
||||
|
||||
|
190E '87: Does anybody know if ...
... a 1987 190E 2.3 came with an under engine "encapsualtion" tray?
My daughters project car is missing one. I wasn't sure if the 4 cylinder cars needed it. I saw the attachment fittings underneath today while working on it. Haasman
__________________
'03 E320 Wagon-Sold '95 E320 Wagon-Went to Ex '93 190E 2.6-Wrecked '91 300E-Went to Ex '65 911 Coupe (#302580) 
|
|
#2
01-02-2003, 01:14 AM
|
||||
|
||||
|
I'd bet a buck it did.
If I'm not mistaken, your daughters car is equipped with an M102 motor. That motor is simpy 2/3's of an M103 motor - more or less the same engine minus 2 cyls. If I'm wrong, then I've got to believe you have a 103 motor. The M103's have a fairly large encapsulation piece underneath. Some are affixed with 4 small metal screws(bolts) with an 8mm head. I seem to recall reading on a CD-Rom that the 103 motors in the 124 cars have more than 4 bolts holding the encapsulation panel to the car. You might search around this sites FASTLANE or one of the other WEB parts providers to see if they stock one.
__________________
Mike Murrell 1991 300-SEL - Model 126 M103 - SOHC "Fräulein"
|
|
#3
01-02-2003, 10:14 AM
|
||||
|
||||
|
Mike
Thanks for the reply. Our '91 300E definitely has the panel. Your suggestion regarding searching Fastlane parts is a good one. Haasman
__________________
'03 E320 Wagon-Sold '95 E320 Wagon-Went to Ex '93 190E 2.6-Wrecked '91 300E-Went to Ex '65 911 Coupe (#302580)
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
