2.3 8V air flow sensor work in a 16v
1 Attachment(s)
hi
i was wondering if i got a normal 190e 2.3 8V air flow sensor if i could put it in the 2.3 16v , is it the same part ? , i know that the idle valve is differnet, so the MB shop manual says, but there was no saying if the air flow sensor was differnt, just wondering because 2.3 parts are alot easier to get then the 16v, if any one has a 16v air flow sensor i could use it thanks dave 86 190e 16v iroc 911 rep benson gyrocopter |
I am not 100% sure about using a 8vlv airflow meter on a 16-vlv, but I doubt it would work.
Unfortuately, most 16-vlv parts are 16-vlv specific.:rolleyes: Costly at best! |
All times are GMT -4. The time now is 05:29 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website