I have a 1988 560SEL with the becker stero, looks great but theres no sound. All of the controls work, the stations change, and the tape plays , but no sound. Not even a crakel or static. Is there somrthing like a preamp with a fuse that could blow that I could replace or is this something that I might have to have the manufacture fix.

For the price of even getting an engineer to *look* at the Becker you could get a new headunit ;-)

Bri



------------------
Brian Drought
1991 300CE
http://www.users.globalnet.co.uk/~drought/
ICQ: 2180069

Is there one plug which handles all speaker outputs. Could be loose connector.. You could also have a bad ground for audio output if no sound anywhere. How many speakers (6?) If you can access the output connector, grab an ohmmeter and check each speaker lead. Should be between 4-8 ohms. If below 4 ohms or zero resistance, you've got a short and possible damage to audio output stage. I don't believe the preamp sections are separately fused as these are low power devices. Outputs may be fused. If all the head end stuff is working and you sit in silence, it's probably a connector or a shorted, damaged output stage. if you aren't up to troubleshooting this kind of problem and the warranty is no help, find a local who does car stereo work, and he may get you headed in the right direction. With no sound at all from any speaker, it really sounds like a connector. Hey, good luck...


------------------
Jeff L
1987 300e
1989 300e