|
|
|
#1
|
|||
|
|||
95 E320 vacuum routing
I'm in the finishing phase of changing my head gasket and engine wiring harness. I started this job before I got my digital camera. I have two vacuum connections that don't seem to go anywhere (arrows). Could someone please pop the plastic timing cover off their E320 and look at their vacuum lines to see where they go? There's a good chance these connections don't go anywhere. The upper rubber hose has no evidence of being connected to anything. But I'd feel better with verification from someone.
(Image removed 3/29/03 to save site bandwidth)
__________________
95 E320 Cabriolet, 159K Last edited by Kestas; 03-29-2003 at 12:30 PM. |
#2
|
|||
|
|||
Those are from the Switch-over valves.
One goes to EGR valve and the other to the AIR pump control valve... |
#3
|
|||
|
|||
So is this the correct hookup?
__________________
95 E320 Cabriolet, 159K |
#4
|
|||
|
|||
Correct...
|
Bookmarks |
|
|