PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Installing a new shift knob (http://www.peachparts.com/shopforum/showthread.php?t=6301)

David Hendy 02-12-2000 06:29 PM
I have a burl Walnut shift knob and need to install it. How do I remove the shift gate of my 500E?

David Hendy

jeffsr 02-12-2000 10:42 PM
Remove the trim around the shift gate,unbolt the retainer bolts for the gait mechanism, Get under the car and disconnect the shifter from the linkage to the tranny, remove assy. from the inside of the car,careful with the rubber boot that inserts in the transmission tunnel.

------------------
Jeff L
1987 300e
1989 300e
1987 BMW 325

[This message has been edited by jeffsr (edited 02-12-2000).]


All times are GMT -4. The time now is 04:36 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2026 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website