Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-22-2003, 01:06 AM
Registered User
 
Join Date: Mar 2001
Posts: 16
Unhappy 93 190E hard to start

Yesterday I replaced the thermastat cover and thermastat. I also drained and replaced water and antifreeze. The problem is When I finished filling with water and tried to start the car.......it took about 15 to 20 seconds to start and when it did start it idled very slowly for a few seconds and then it seemed ok. I thought maybe I got water on something i shouldn'd have so I let it run for a while. After shutting it off I tried to start again right away and it started right away like normal. This morning it took 20 or 30 seconds of cranking to start. Again after running for a while I shut it off and started right away and it starts right up. So bottom line ..when first starting it or after it sits for a few minutes not running it takes 20 seconds of cranking to start but if you turn it off and start it right away ...it starts right up. Any ideas?
Thanks in advance! You guys always come through!
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page