|
|
|
|
|
#1
06-04-2003, 11:42 AM
|
||||
|
||||
|
missing part? HELP
last oil change i saw these bits of what looked like black plastic in the filter canister receptacle that crumbled when i tried to grab them. i am doing another oil change and noticed that they were actually still there. is there a part missing here? is the spring next to the center outlet supposed to have some kind of cover? i had never looked that closely inside and just popped a new filter in everytime.
i also sprung a leak and i will attach another picture in the next post. i don't know if they are related. i am thinking the bypass was affected? oil pressure was always healthy and above 1.5 bar when hot. picture of filter canister receptacle:
__________________
joE 1993 300e-2.8 - gone now <sigh> "Do not adjust your mind, it's reality that's malfunctioning" http://banners.wunderground.com/bann...L/Key_West.gif 
|
|
#2
06-04-2003, 11:46 AM
|
||||
|
||||
|
this is a picture of a tube just back and above the oil sump. it appears to be leaking. i don't know if it is a related problem.
picture of leaky tube:
__________________
joE 1993 300e-2.8 - gone now <sigh> "Do not adjust your mind, it's reality that's malfunctioning" http://banners.wunderground.com/bann...L/Key_West.gif
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
