With that VIN our cars should take the same part according to the CD. Any measurements would be great!

I just measured mine... the distance on my car from front to middle holes is 50cm on both driver and passenger side. The distance on the part I received is 52cm.

The distance between the front two holes is 37cm and between the two middle holes is 48cm, both of which match the part.

So it's fine except for being 2cm too long.


Rear holes are not applicable to the part I have, but for comparison... the distance between middle and rear holes on my car is 42cm (drivers side) and 41cm (passenger side).

The distance between the two rear holes is 56cm.

My car doesn't have any screw anchors in the rear two holes, so I don't know if those holes were never used or if the anchors fell out at some point.

__________________
1992 300E Sedan (Sold)
1999 E320 Wagon (Sold)
1995 E320 Sedan
1995 E320 Wagon