|
|
|
#1
|
|||
|
|||
spark plug question
hello to all
i change my plugs with the factory specs i have driven the car 1500 miles since i change them today i decided to do a plug reading plugs are still white excep for very minute brownish tint at the tip of the porcelin. when i check pin 3 at x11 somedays it reads 43 to 54% fluctuating then there are days like today it reads of scale on my fluke 88automotive meter and no matter which way i turn the mixture screw it won't change but i can make the car run rought or smooth as i play with the mixture screw. items that were change 6 months ago idle control solenoid fuel distributor+eha valve fuel filter cap+rotor,wires,plugs ovp relay. also at time when i turn the car on for the firts few seconds the car runs rought like if it was choking or running on 5 cylinders thanks |
#2
|
||||
|
||||
josev
Your profile say 92 190e 2.6. Is this the car you are talking about? How many miles on the engine? Sounds like a leaking injector. New injectors have been known to be bad. Haasman
__________________
'03 E320 Wagon-Sold '95 E320 Wagon-Went to Ex '93 190E 2.6-Wrecked '91 300E-Went to Ex '65 911 Coupe (#302580) |
#3
|
|||
|
|||
YES THAT IS THE CAR
CAR HAS 117,I FORGOT TO MENTION i change the o2 sensor too. |
Bookmarks |
|
|