Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 08-04-2003, 06:07 PM
Registered User
 
Join Date: Nov 2001
Location: North Central Kentucky
Posts: 1,069
Good grief. Lucky you didn't have a battery explode. Start thinking in terms of fried wires. If you did not have your key on, most of your electrics will probably be ok. Big damage will be at the battery (at least swap it out for testing) and any cables that were in line in the short. Don't forget to check frame to engine ground cables. You may have to replace several wires and cables. With new battery and any bad cables you can see replaced, try putting a meter on the starter and see if you have 12 volts measured between the case of the starter and the big battery cable stud. Turn key and see if voltage stays there or if it drops to new zero. Also, see if you get 12 volts at the small terminal when you turn the key. After that, you are going to need the wiring diagram. Side note: when you install the new battery, try to measure any current draw on the battery with everything turned off. Anything more than say 0.03 amp is probably a componet gone south.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page