|
|
|
#16
|
|||
|
|||
You are correct it is p0170. it is still off.. after driving over 100 miles.
I will try to see your other post in a different forum about 40% acceleration to see if it hesitates. Thanks again. Will post final outcome. |
#17
|
|||
|
|||
CodeP0100-Mass Air Flow problem
My vehicle is a 98 E300 Turbo. The malfunction code is P0100 "Mass or Volume Air Flow Circuit Malfuntion.
Any thoughts on what I should look for to remedy the situation. Many thanks to all who can help! Garth |
#18
|
|||
|
|||
code PO107 is the map/baro sensor both work together and if the altitude were high (incorrect altitude because of faulty baro sensor)then you get less fuel delivery due to faulty altitude from the baro sensor, then you get the other codes beacuse of a lean mixture of air and fuel
|
#19
|
|||
|
|||
Quote:
|
#20
|
|||
|
|||
please help with my code p0700
my 2001 s430 with 90k came out a code is p0700..the car was running and suddenly the car runs like netural not going anywhere and i have to shift it to netural then back to drive then it's normal again...it's happen to me couple times now. sometime it feel like the car don't really want to change into gear... the shop change the trans fluid for me today and when i see them drain it, it only drain out around 1 qt...this is normal?. they have change the filter, gasket and add 5qt( is this enough?).i'm start to think that maybe is low on transmission fluid that causing the problem or something else?..can anyone tell me when low on transmisson oil will make the car sfit unnormal? also sometime went to netural? what knid of problem will you have when the transmisson fluid is low? also i just relize the my driver side front suspison makes some kind of squeeze noise when the road is unsmooth but runs perfectly fine..what can it be? thanks for reading this..please help..i'm new to this..
|
Bookmarks |
|
|