Adjusting turn signal lever

[francis]

I recently took out my steering box and when I put it back on, the steering wheel was a bit off. I had to take out the steering wheel and "center" it.

What happens now is that when I use the turn signal on one side, I have to manually flip it back and to the other side - it flips back with just a slight turn.

Is there a way to adjust this without removing my steering box again?


Thanks!

------------------
94' E280 Euro
85' 300D Euro
87' 250D Euro
77' 300D Euro
Manila, Philippines

[Benzmac]

You have to move the flex joint on the sector. You can't just move the wheel. It will throw every thing off!!!


------------------
Benzmac:
Donnie Drummonds
1992 500E (very soon I hope
1981 280GE SWB
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

[francis]

How does the flex joint look? Is it that "joint" (with 6mm Hex screws) that connects the Box and the steering shaft?

How do I put the steering in center position from the left and right? This is when the box is not connected.


Thanks!