Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 05-27-2000, 10:52 AM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
Since you of course have a well maitained auto, there should be no need to adjust valves. MB actually wanted them adjusted every 10k miles in 73. If you let them go for maybe 70,000 miles between adjustments you might get an idle problem or eventually (although I have never seen a V8 abused badly enough) burn a valve.

You need to deal with your timing problem first as the EFI V8s were so sensitive to manifold vacuum for fuel control. I would disconnect all vacuum lines to the distributor till you get a stable light. Without any vacuum control you should have at least 10 degrees advance at idle. You should have 15-17in manifold vacuum.

If you have misfires it is not likely a valve problem or a mixture problem unless you are fouling plugs. Identify the offending cylinder by pulling injector wires. This kills the cylinder and the resulting misfire should occur evenly on each cylinder. The ones that don't make a difference aren't running properly.

Deal with your vacuum/timing problem and get rid of the misfires and I might tell you how to adjust the mixture.

------------------
Steve Brotherton
Owner 24 bay BSC
Bosch Master, ASE master L1
26 years MB technician
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What tools needed for 2.3-16 valve adjustment? Dan Rotigel Tech Help 12 01-23-2005 10:43 PM
Less Power After Valve Adjustment? coldwar Diesel Discussion 3 12-22-2004 11:22 AM
M117.963 Valve Lash Adjustment moolewman Tech Help 0 07-25-2002 01:09 AM
Valve Stem Replacement - Question?? Corby Diesel Discussion 15 11-03-2001 06:24 PM
82 300TD A/C problem benchracer Diesel Discussion 15 06-16-2001 09:50 PM



All times are GMT -4. The time now is 10:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page