|
|
|
#1
|
|||
|
|||
vacuum lines question
On an early W124, what vacuum lines are located in the engine bay?
I was thinking maybe to replace them as a prevetative measure. thanks,
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen |
#2
|
|||
|
|||
Sjsfiji,
Do you have any vac problems ? Are ther any parts, hoses, tubes, rubber elbows or other items who became brittle ? If not : don't touch them. If you do, be sure to make a good drawing of the routing of everything. I found out there are not two the same, even not when looking at the same type of W 124. In former postings I read that all the tubings have the same - nylon white - color now when newly ordered, not rendering problem-solving any easier ! I have made a complete plan of the tubes on my car and as it is a W 124 Diesel, it will be not of great use to you. But I see more or less "clearly" now. Anyway, if you need help - as I have an electronic parts catalogue of the W 124 - let me know the correct type of your car ( a W 124007 ? ) and the tranny ( auto/manual) and I will take a look for you. Danny |
#3
|
|||
|
|||
thanks
thanks danny... You're right. I have no vac probs right now so I'll take your advice and not touch anything....
__________________
sjsfiji '87 W124 260E (DD) 98K orig. mi. @7/15 CLK 7-Spoke Forged Wheels Neuspeed springs/Bilstein Sport 4/3 bump (F/R) '97 993 Carrera 106K orig. mi. Always driven like it's stolen |
Bookmarks |
|
|