|
|
|
#1
|
|||
|
|||
What is the nominal height of the control piston from the fuel distributor bottom face. I want to replace the seal where the piston sits on but I do not know the height to screw the adjustment to. Mine appears to be taken apart before. I do not have acces to a new one to measure.
Any help would be appreciated. ------------------ Regards Mino Erhan Dallas, TX '86 300E '67 Peugeot 404 Conv. '85 Peugeot 505 STI '99 Suzuki GSF 600 Bandit |
#2
|
|||
|
|||
I have no such measurement. If you move this, you will never get the fuel mixutre back calibrated. Bosch and our Partsshop offer these in Rebuilt.
------------------ Benzmac: Donnie Drummonds 1992 500E (very soon I hope 1981 280GE SWB ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fuel Smell after Fuel Line R/R | jriewer | Tech Help | 3 | 03-16-2004 11:47 AM |
?? flow paths of the 617 fuel filter | coachgeo | Diesel Discussion | 9 | 08-07-2003 12:35 PM |
fuel injection problems | bad122452 | Tech Help | 0 | 08-05-2003 08:25 PM |
Diesel fuel testing ! | LightMan | Diesel Discussion | 0 | 10-12-2002 03:21 PM |
How is fuel used during downhill with no throttle applied? | bill17 | Tech Help | 21 | 03-06-2002 11:29 AM |