|
|
|
#1
|
||||
|
||||
Cylinder Torque Settings
Hi friends,
I am planning to do an overhaul on my M103. Are there any specific torque settings for the cylinder head, etc. Any help would be appreciated. Thanks. Rgds |
#2
|
||||
|
||||
Cylinder Head Torque Settings
Anyone? Thanks in advance.
|
#3
|
||||
|
||||
yes there are torque specs. Do you have a manual (CD)? I would suggest getting one if you don't. There is an initial torque then two angle turns. You will need to measure the cylinder head bolts to insure that they have not stretched beyond spec too.
__________________
Jim |
#4
|
||||
|
||||
The W124 CD says 50Nm and 90-degrees twice, the W126 and W201 (per Gilly) CDs say 70Nm and 90-degrees twice.
Sixto 95 S420 87 300SDL 83 300SD ... $950, see cars forum |
#5
|
||||
|
||||
thanks
Noted guys. Thanks!!
|
Bookmarks |
|
|