|
|
|
#1
|
|||
|
|||
Re-Sealing A/C compressor
Hi everybody,
I need some information about an A/C compressor because even if is still working fine I notice a small trace of oil near the clutch and I suspect that I have a gas leak from the shaft gasket. My car is a CLK 430 1998 and compressor is NIPPODENSO do you know where I can find a gasket-kit in Europe or some place in the USA able to send it to me? Many thanks to all because if not I have to go to MB dealer and I loose (an) arm and (a) leg for a rebuilt compressor...... Alberto |
#2
|
|||
|
|||
Very few places reseal nippondenso compressors successfully. I doubt you will be any different.
Some oil residue is normal at the front shaft. Are you low on refrigerant? Leave it alone untill you are sure you have a leak.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#3
|
|||
|
|||
Thaks Steve,
I would like...............but i think that i am low of refrigerant because during the end of summer the air was not very cold, and i would like to fix it befor the new summer due to hot temperature in Gneva city ( around 35- 38 Degree in some days...) Many thanks Alberto |
#4
|
||||
|
||||
Here's an article on one of the Porche boy's Nippondenso rehab. FWIW. http://www.pelicanparts.com/techarticles/911_Nippondenso_rebuild/911_Nippondenso_rebuild.htm
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|