Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old 02-27-2004, 08:01 PM
rjk's Avatar
rjk rjk is offline
Registered User
 
Join Date: Oct 2002
Location: Atlanta metro area
Posts: 201
update

No, no part yet, if everything is going to plan (HAH!), it is in transit from Germany to the States. Should get here inside of a week, then it gets overnighted to me. Cost is around $178 I think. Apparently, the connection at the pump end is the sticking point as far as rebuilding it goes. The bracket and bends disallow use of the machine.
Anyway, I got disgusted over the weekend and looked closely at the old hose, the hose itself is a GATES hose which makes me think it was rebuilt at one time, unless the MB supplier over in Germany uses GATES hoses. The hose was bad only where it passed the exhaust manifold (cracked & bleeding due to the heat), so I had a brainstorm. Why not cut the bad off and run a brake line to replace the missing hose? Should work. So I did the deed and it didn't take too long to reattach the connector the the shortened hose (don't get me started on the inabilities of "machine shop experts" not knowing how to do something by hand if their power tools don't fit). I had the connector off, the hose cut to length, and the connector reattached within 30 minutes, not easy, but certainly doable.
Then it was off to PEP Boys and Advance Auto to look for a brake line. Couldn't find one that fit, I needed to match the fittings and they were 12mmX1.0 thread size. After scrounging around their back rooms, I found an adapter from male 12mm to fem 3/16". Now I could get a 3/16" brake line to hook up. Unfortunately, there was no combination of adapters I could cob up for the other end and I was stuck hard and fast. It was Sunday, so NAPA and the better parts stores were closed. I briefly toyed with the idea of cutting the hyd. line and replacing the male 12mm connector with a 3/16" or 1/4" conn. but thought better of it. I didn't want to do anything I might regret later. However, if the hose doesn't get here soon, I'll hunt down the gates hose and rebuild the %@$#%@#$ thing myself.

So much for teutonic efficiency!
__________________
1999 E320 (gave to daughter) 250K
1994 F150 (may be the end of its road) 240K
1989 560 SL (Reassembly after paint job) 160K
1986 560 SL (deceased., gave it's life protecting my wife)
1988 300 TE (departed)
1994 945T (still running strong with an upgraded cam) 349K
1986 242Ti (deceased)
1968 GT500KR (under restoration)
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page