|
|
|
|
|
#1
07-11-2000, 12:59 PM
|
|||
|
|||
|
I have a '85 380 se, while raising the rear passanger window i heard a crack when it reached the top. I can hear the motor work, but no window movement. I have been able to get the back part of the door panel off but cannot get the panel off at the door handle area(first problem). By peeking in I can see that the rod that slides front/rear below the window has popped out. Is this fixable????
|
|
#2
07-11-2000, 10:43 PM
|
|||
|
|||
|
You have a broken slide jaw more than likely. The part is sold separately.
It is not that hard if you have done this before. The part you are fighting with is a bolt that is at the upper portion of the door handle behind the plastic trim. ------------------ Benzmac: Donnie Drummonds 1991 GMC Syclone ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 300TE rear window regulator | ED C. | Tech Help | 1 | 03-23-2004 03:40 PM |
| 116 Rear Window Seal | NYDEISEL | Diesel Discussion | 3 | 02-04-2004 06:29 PM |
| W210 Rear Window Regulator | Ockman | Tech Help | 8 | 10-16-2003 10:53 PM |
| Heated Rear window interferance on FM radio | Tempman | Car Audio and Multimedia | 2 | 01-10-2003 03:38 AM |
| 1984 380 SE rear window defroster switch | clamman1021 | Tech Help | 1 | 12-30-2002 12:13 AM |
Linear Mode
