Hi,

I am trying to find the P.N for the Rear Sway Bar bushings - for the 126. They are not listed in Fastlane or the other On- Line vendors.
Are they split(slip on) like the front bushings, or do you have to remove the entire Sway Bar to install ?
Thanks In Advance.

Attached Thumbnails

 

I got mine from FastLane as a kit, but the kit is no longer listed. Call Phil at 1-888-333-4642 or send him an e-mail. He'll have access there or through Part Shop.

__________________
Earl McLain
'02 C230 Kompressor
'89 560 SEL "Frau BlueCar" (retired April 2004)

The rubber bushing for MOST W126 chassis is number 126-326-04-81.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Thanks for the quick response. Still I couldn't tell for sure from looking under the car, whether they Are split(slip on) like the front Sway Bar Bushings, or do you have to remove the entire rear Sway Bar to install them?

YES, they are split & easy to install.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Thanks again and have a good weekend.