|
|
|
|
|
|
#1
|
|||
|
|||
|
low vaccuum - worn engine?
This problem is driving me crazy - if you have any suggestions please let me know.
I have a M110 6 cyl 2.8 K-Jetronic that is showing a steady 10-12 inches Hg, instead of the expected 18-20. I can't find any inlet side leak. I've pulled the hoses for the tranny and locking and capped them - no change. I've set the timing, mixture - no change. Can worn valves produce this? A compression test reveals low-ish compression, but is this enough to give half the vacuum? Am I missing something obvious? The car is down on power, most noticable at low revs. Any ideas? Much appreciated.
__________________
'79 280SE '87 560SEL '83 280CE '01 Nissan Micra '98 VW Passat '83 911 turbo |
| Bookmarks |
|
|