 
         
		
					|   | 
 | 
 | 
| 
 | 
| 
 | |||||||
|  | 
|  | LinkBack | Thread Tools | Display Modes | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
| 
				
				if you have had a w126 suspension apart, especially the upper control arm...
			 
			
			This is one of the problems on a 420SEL that we are looking at.  Is the swaybar broken off or is it just missing the part that goes through the upper control arm? Thanks David 
				__________________ _____________________________________________ 2000 Honda Accord V6 137k miles 1972 300SEL 4.5 98k miles _____________________________________________ | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
| 
			
			Need a shot from another angle to be 100% sure but it looks like it has a broken sway bar.  Here is what it should look like
			
				
			
		 
				__________________ Jim | 
| 
			 
			#3  
			
			
			
			
			
		 | ||||
| 
 | ||||
| 
			
			Agree with Jim, need to try and get a shot looking in from the front. The sway bar may be broken or the bolt may be broken/missing. It does seem odd that the sway bar is sitting so far in the wheelwell, it should be much closer to the large opening in the upper control arm.
			
				
			
		 
				__________________ Mike Tangas '73 280SEL 4.5 (9/72)- RIP   Only 8,173 units built from 5/71 thru 11/72 '02 CLK320 Cabriolet - wifey's mid-life crisis 2012 VW Jetta Sportwagon TDI...at least its a diesel Non illegitemae carborundum. | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Must be broken if you look at it's length from the bend to the end compared to the other photo........     William Rogers....... | 
|  | 
| Bookmarks | 
| 
 |  |