Saw an article about the W124, I need to replace the mirror glass, drivers side on a W123 coupe. Same deal? Carefully pry off the old mirror and put in the new being careful about some kind of spring??


Thanks.

while my 126 is not your 124 the application of the mirror is likely similar.

first DON'T pry anything. lightly lift or push the mirror to it's extremes where you can see the back side. you will find under the mirror plate there should be a somewhat fine wire i'm guessing about .030. that wire goes around and acts like a sir clip or snap ring if you will. get yourself a fine hook. i use dental tools. once you can reach the wire carefully hook the loop and lightly pull back. if you can see the wire seperating from the mirror back go ahead and take it off. the mirror will just come off.

when you reinstall you wrap the wire on then lightly push it back on.

good luck
craig

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!