|
|
|
#1
|
||||
|
||||
Spring Broke On Engine (See Pic)
Hey everyone i broke this spring some how when i was doign the head gasket on my car, it was corroded so it was probably weak from that,,, i show where it attaches to in the picture, could someone tell me what its purpose is and what the part number is so i can replace it,,,,, its between the fuel distributor and the throttle linkage...
|
#2
|
|||
|
|||
Year and model please.
__________________
1986 560 SEL (159K miles) |
#3
|
||||
|
||||
it is a 1991 300E (w124) with the 3.0
|
#4
|
||||
|
||||
Does anyone have the part number for this spring?? i need to have it replaced ASAp
|
#5
|
||||
|
||||
The same spring broke on my 201. (Sorry, don't have the part #)
Mine broke right at the point where the spring "hooks" through the hole. I was able to heat the end with a propane torch, and re-bend a new hook into it. Then I grease the contact point, and put it back together. It's been fine for over a year. If you need a new one, I would e-mail that photo to Phil at PartsShop (click on the tab at the top of this page). I'm sure he can help you out. Good luck. Jeff Pierce
__________________
Jeff Pierce Current Vehicles: '92 Mercedes 190E/2.3 (247K miles/my daily driver) '93 Volvo 940 Turbo Wagon (263K miles/a family truckster with spunk) '99 Kawasaki Concours Gravely 8120 Previous Vehicles: '85 Jeep CJ-7 w/ Fisher plow (226K miles)'93 Volvo 940 Turbo Wagon '53 Willys-Overland Pickup '85 Honda 750F Interceptor '93 Nissan Quest '89 Toyota Camry Wagon '89 Dodge Raider '81 Honda CB 750F Super Sport '88 Toyota Celica '95 Toyota Tacoma '74 Honda CB 550F |
Bookmarks |
|
|