PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Fuel Gauge Problem (http://www.peachparts.com/shopforum/showthread.php?t=90331)

ALBERTO 03-26-2004 10:21 AM

Fuel Gauge Problem
 
Hi everibody,
I need haelp because my Fuel gauge is not working properly, my car is a CLK 430 1998 with 160000 km
When i full my tank the gauge show 0 , after when it show half in reality the tank is quite empty , and soem times it show 1/4 when the tank is half............it is strange i know......
I saw the 2 sender on the bottom but for open these i think that i need a special tool..
Does anyone has soem pictures about sneder or can explain me how open these?
many thanks for your help.
Alberto

mark cummins 03-26-2004 05:52 PM

Re: Fuel Gauge Problem
 
Quote:

Originally posted by ALBERTO
Hi everibody,
I need haelp because my Fuel gauge is not working properly, my car is a CLK 430 1998 with 160000 km
When i full my tank the gauge show 0 , after when it show half in reality the tank is quite empty , and soem times it show 1/4 when the tank is half............it is strange i know......
I saw the 2 sender on the bottom but for open these i think that i need a special tool..
Does anyone has soem pictures about sneder or can explain me how open these?
many thanks for your help.
Alberto

The 208s and Other late Model Mercedes do have Problems with the fuel tank sending units...its The Sending units in the fuel tank
You MUST drain the tank to replace the Sending units

Mercedes said..that there is a updated sending unit....Im Not so sure...My W210 is on its Fourth sednding unit...

Yes You WILL Need MB tools to drain the tank on BOTH sides
And Again Special tools to remove the metal ring that secures the fuel tank sending unit to the tank...

You can Try to use to small punches and a screw driver to release the metal ring that is threaded into the tank that secures the sending unit...worked for me!

You Must remove the plastic covers to get access to the sending units....Under the car


All times are GMT -4. The time now is 05:25 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website