PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   1998 W210 AC indentification (http://www.peachparts.com/shopforum/showthread.php?t=94087)

phouse 05-12-2004 01:05 PM

1998 W210 AC indentification
 
Can anyone Identify the high and low side connections for the AC. I can see one on the left side up top, but where is the second one??? I want to check the to see if I have enough freon.. When i pull the numbers from the AC controller the value for number 5 is reading 129.. and the value for number 7 is 02.. I believe that's the pressure..

Peter

mbdoc 05-12-2004 05:53 PM

Yes, that is the pressure & 2 bar X 15 = only 30psi. Should be 6-7 bar (06-07)

pwells 05-13-2004 05:32 PM

The high pressure schrader is behind the grill on the front, on the driver's side. I'm not sure about the codes, take a look here for info...

http://www.continentalimports.com/ser_ic40142.html

I think #5 is temp in the evaporator housing, not a pressure.

Good luck,

Peter

phouse 05-17-2004 02:07 PM

Added freon
 
Hello I added some freon.. And the pressure came up to 7-8 with the car running.. then I got cold air, the left center vent was blowing a little warm at first.. I still think I have a bad vacuum leak on that side, I can hear it..
The number 5 value is still high, like 120 I think that is too high..

Peter

bjafari 07-09-2004 09:18 AM

Were did you apply the freon, I can not find the valve.


All times are GMT -4. The time now is 08:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website