PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Tune up specs for 1966 250SE? (http://www.peachparts.com/shopforum/showthread.php?t=96795)

SoCal250SE 06-13-2004 04:50 PM

Tune up specs for 1966 250SE?
 
Hi everyone, new member here. I was just wondering if anyone has a shop manual handy w/ tune up specs for a '66 250SE coupe, (111 body), also I am not sure which motor it has, 114?

(The car belongs to a GF, I am doing a little maintenence on it).

Unfortunately the original books, (owners manual and maintanence) are missing, these usually had good info in them.

At any rate, what I need are the correct ignition specs: plug gap, dwell, static and dynamic timing if possible @ different RPMs, (and whether these specs are with or w/o vacuum connected), total advance @ (what rpm), etc...

Mucho appreciation to anyone who sees this and posts them, thanks a lot! Great forum!

SoCal250SE 06-13-2004 04:57 PM

Also, FWIW I did attempt a search before posting this. I am an active member of a Porsche tech board that is the same web format as this. Thanks again.

SoCal250SE 06-14-2004 02:38 PM

Anyone? Am I on the right board, or is this only for late model cars? TIA. :cool:

suginami 06-15-2004 08:18 PM

Hi Kimmie.

The Vintage Forum has lots of people with W108's, and I'm sure you'll get a better response. (make that any response!)
:)


All times are GMT -4. The time now is 03:55 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website