| 
								 | 
							
								
  | 
							
								
  | 
						
								
  | 
						
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
				
				Tune up specs for 1966 250SE?
			 
			
			
			Hi everyone, new member here. I was just wondering if anyone has a shop manual handy w/ tune up specs for a '66 250SE coupe, (111 body), also I am not sure which motor it has, 114? 
		
		
		
			
		
		
		
		
		
		
		
	
	(The car belongs to a GF, I am doing a little maintenence on it). Unfortunately the original books, (owners manual and maintanence) are missing, these usually had good info in them. At any rate, what I need are the correct ignition specs: plug gap, dwell, static and dynamic timing if possible @ different RPMs, (and whether these specs are with or w/o vacuum connected), total advance @ (what rpm), etc... Mucho appreciation to anyone who sees this and posts them, thanks a lot! Great forum!  | 
| 
		 
			 
			#2  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
		
		 
			
			Also, FWIW I did attempt a search before posting this. I am an active member of a Porsche tech board that is the same web format as this. Thanks again.
			
				
			
		 
		
		
		
			
		
		
		
		
		
		
		
	
	 | 
| 
		 
			 
			#3  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
		
		 
			
			Anyone? Am I on the right board, or is this only for late model cars? TIA.  
		
		
		
			
		
		
		
		
		
		
		
	
	 
			
				
			
		 | 
| 
		 
			 
			#4  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
		
		 
			
			Hi Kimmie. 
		
		
		
			
				The Vintage Forum has lots of people with W108's, and I'm sure you'll get a better response. (make that any response!)  
			
				
			
		
				__________________ 
		
		
		
		
		
	
	Paul S. 2001 E430, Bourdeaux Red, Oyster interior. 79,200 miles. 1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".  | 
![]()  | 
	
	
| Bookmarks | 
		
  | 
	
		 |