Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 10-03-2000, 12:35 PM
Registered User
Join Date: Jan 2000
Location: St. Paul, Minnesota, USA
Posts: 58
Just had some unibody-bending work done to my '87 560SL, and I have to give big props to Sears Imported Autos in Minneapolis (and mgr. Bruce Bigalke) for taking such good care of my previously-wrecked car.
But the work left me with some squeeks that seem spring/shock-related (when I get out of the car, there's a moderately high-pitched squeak/moan) and when I'm driving, there's a very high-pitched chirp coming from the stick shift that goes away when I put my hand on the stick, but returns promptly when I take my hand off.
Do I just need some grease? I tried a little WD-40 down the shift hole, but to no effect.
Any ideas? Or is this one for the mechanics?
I don't have a lift, so I can't really get under the car.
Thanks in advance, and get well wishes to Aaron and belatedly, to Donnie


'87 560 SL

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page