Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-26-2004, 01:35 PM
Registered User
 
Join Date: Jun 2004
Posts: 8
sunroof weather stipping installation

Please could you explain how to install new weather stripping in sunroof of 1985 300sd?Going to rain tonight and I need to install.
Thank you

Reply With Quote
  #2  
Old 06-26-2004, 04:13 PM
afmcorp's Avatar
Registered User
 
Join Date: Jan 2002
Location: NW Indiana LaPorte
Posts: 571
sun roof

hello

if you're talking about the felt seal it's really easy.

open the roof. look at the felt and you will notice a rail groove. that is what holds the felt in place. you'll also notice that there are small phillips head screws every 4 or 5 inches. back these out and you can pull the felt up. to install the new just slip it under the rail's lip and insert the screws.

i don't recall exactly but some roofs had the felt in sections maybe 4 and some perhaps only 2. you really shouldn't have much problems with this job. you might also lube your roof's rails so the roof motor won't have to work so hard.

good luck!
__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!
Reply With Quote
  #3  
Old 06-27-2004, 12:20 PM
Registered User
 
Join Date: Jun 2004
Posts: 8
Smile Thanks for the reply

Its the rear rubber that I cannot install. I don't want to take down the headliner.
Thank you
mikie
Reply With Quote
  #4  
Old 06-27-2004, 12:25 PM
Registered User
 
Join Date: Jun 2004
Posts: 8
more

The rear rubber has a grove that fits into a thin rail behind the roof, but I can't figure out how to get it in? Whats the trick? someone must know.
Thank you
Mikie

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page