![]() |
|
|
|
|
#1
|
|||
|
|||
O2 Sensor Light in Dash does not light
Hello,
'86 300E If my O2 Sensor has disconnected due to a bad connection or similar cause, will the 02 light in the dash, with key in position #2, before a start, be on or off?
__________________
David 1986 300E Anthracite + ECodes + MB Mileage Award |
#2
|
||||
|
||||
If there is still a bulb in the holder, it should light up briefly at startup. Around that time, it was a "maintenance procedure" to remove the O2 bulb when the sensor was changed for the first time, since there was no reset on the odometer wheel that set it off.
|
#3
|
|||
|
|||
The light works intermittently. I do not beleive the bulb removal applies to the '86 300E -- it does not show in my service manuals or on AllDataDIY.com.
__________________
David 1986 300E Anthracite + ECodes + MB Mileage Award |
#4
|
|||
|
|||
Hello Everybody,
This is fixed. It was the OVP Relay.
__________________
David 1986 300E Anthracite + ECodes + MB Mileage Award |
![]() |
Bookmarks |
|
|