|
|
|
#1
|
|||
|
|||
Changing Hand brake shoes on 190e
I understand that the hand brake shoes are inside the rear rotors. My hand brake works, but its weak. While I had the tire off last night as I rotated tires, I looked at the drum and there seems to be a center nut on the threaded axle that has one if its edges bent into a groove to prevent it from loosening on its own.
Do I need to remove this center nut in order for the rotor to come off so I can access the brake shoes? Or, is there some other trick to getting the drum off? I read online here that there is some star shaped screw that can be seen inside one of the lugnut holes to adjust the shoes tension. If I loosen that will the drum just slide off? Also, that being the case can I just tighten it to make the brakes work stronger again without replacing the pads? Thanks guys! -=>Raja.
__________________
1983 MB 190E, bought from Germany and shipped to the US in 1986. |
Bookmarks |
|
|