Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-08-2004, 12:45 PM
MBZ OE
Guest
 
Posts: n/a
300e trans shift problem question

My trans has an upshifting problem that just comes and goes. I have found that if I leave the fluid level at the cold full level when the trans is hot, that I have no problem. But if I fill it exactly to the full hot mark while hot, it starts to have a problem shifting into 4th.
Does anyone know what might be going on like foaming causing this?

And is it safe to run mt tranny with the fluid level a few millimeters down to the cold full level?

Thanks again everyone
Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page