|
|
|
#1
|
|||
|
|||
"new" body "new" engine
i am in the early beginings of moving my wonderful engine from my 83 300sd because of a failing body and the inability to get into a restoration shop locally.... my intentions are to put the engine into my 86 420sel.... i realize this is going to be a "bit" of a challenge and i was lookiing for any advise that i could get.... help
|
#2
|
|||
|
|||
i failed to mention that i do intend to move the transmission as well....
|
#3
|
|||
|
|||
art,
That should be a bolt-in job, installing the vacuum shut-off switch on the steering lock & plumbing the fuel lines will be the hardest part & that shouldn't cause any real problem.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|