|
|
|
#1
|
|||
|
|||
M115 cylinder head specifications
For general knowledge.
Total height of cylinder head when new 84.5-85.0 mm (3.327"-3.346") Permissible total material removal 0.8 mm (0.031") Permissible unevenness of surface 0.1 mm (0.004") Minimum thickness/height 83.7 mm (3.295") From MB M115 service manual, section 01-0/2, page 54 According to the service manual this applies to the OM615 as well with the added caveat of if the head is re-surfaced, the appropriate shims need to be used for the prechamber protrusion. 5.5-5.9 mm (0.216"-0.232").
__________________
“Whatever story you're telling, it will be more interesting if, at the end you add, "and then everything burst into flames.” ― Brian P. Cleary, You Oughta Know By Now |
Bookmarks |
|
|