W115 Bolt for Power Steering Bracket

[hansc27]

Hoping someone can point me in the right direction here.

A few months ago I removed the power steering pump on my 1976 240D. This was for replacing the alternator and in hindsight I probably could have just loosened the pump itself to remove the belt.

In any case, very much a newbie with this car I removed the pump along with the bracket. I was finally ready to put everything back and as far I can see the pump bracket is attached to the front of the engine and bolted into the top of the oil pan.

I do have the nut and washer to attach the pump to the bolt at the front of the engine, but I can for the life of me not find the bolt to attach the bracket to the top of the oil pan

I got a couple of bolts from Lowe's but no surprise that they are either slightly too small or big.

If anyone happens to know what size bolt I will need for this, or even better where to find it, I would be immensely grateful.

Thanks all!

[rumb]

Either look up the MB part number and buy it from them or find same size here:
https://belmetric.com/

Sticky at top of forum explains how to find parts.