70' 280se won't start

[mangpo]

I replaced cap, rotor, point, condenser, spark plug and wires. Now it won't start. I cranks but thats it. Re-checked connection 2x Help, any suggestions will be appreciated.

Thanks

[wbain5280]

Check your plug wires.

Zundfoldge: 135624

[Tomguy]

You sure you got the point gap correct (or at least to the position where they fully close and open at least a little bit)? They need to be able to close and open to have the ignition fire.

The wires you put on: Not a new "Set" I hope, just unscrewed the old spark plug connectors and end plugs and cut new wire the proper length, then screwed the connectors back on?