Quote:
|
Originally Posted by bigbillyboy
I am getting my 1985 300d ready for the paint shop, and have a couple of questions regarding trim removal.
#1 - how do I remove the black plastic grating from under the windshield wiper?
#2 - how do I remove the aluminum trim that runs ABOVE the doors and down to the front fender
#3 - when removing the rubber trim below the doors, does it just 'pop' off? I pryed a small piece off, but the long pieces seem to require significant force. Is that correct.
any help would be appreciated.
|
I only know my SD, but if it's like that, then #1- remove wipers and rubber at bottom of windshield #2- very small screws you can see when you open up the doors #3- sort of, but there is a threaded stud that passes through a hole in the door. You have to remove the door panel to undo the plastic hex nut and you need a 7mm open end to do it.